# Glossary: Energy Data, Metering and EDDIE UA Terms

> Short explanations of terms used on this portal. This is a reader's guide, not a legal definition. The legal meaning of these terms is set by Ukraine's Electricity Market Law, the Commercial Metering Code and other acts in force. Updated 21 November 2026.

## Market participants

**AKO – commercial metering administrator.** Organises the statutory commercial metering functions and the handling of metering data. Under Article 53 of Law No. 2019-VIII these functions are assigned to the transmission system operator (NPC Ukrenergo). EDDIE UA does not propose to transfer AKO functions to anyone else.

**PPKO – commercial metering service provider.** An entity that performs commercial metering functions under the Code: installing and maintaining metering equipment, and collecting and forming data within its status. A technical integrator does not automatically become a PPKO.

**DSO – distribution system operator.** A company that owns and operates the distribution network in a region. It is often the PPKO for customers connected to its network.

**TSO – transmission system operator.** In Ukraine this is NPC Ukrenergo. It runs the high-voltage grid and performs the AKO functions.

**BRP – balance responsible party** (in Ukrainian, SVB). A market participant that is financially responsible for imbalances of its metering points or balancing group.

**Supplier** – a company that sells electricity to a customer under a supply contract.

**Independent aggregator** – a participant that combines the flexibility of several customers (load shifting, batteries, generation) and offers it on the market without being their supplier. To assess flexibility it needs historical metering data, but only on a lawful basis.

**NCRECP** – the National Energy and Utilities Regulatory Commission of Ukraine (НКРЕКП). It approves the Commercial Metering Code and its amendments.

**Customer** – a person or company buying electricity for their own needs. The customer or their proper representative is the one who initiates a third party's access to their data.

## Metering and identifiers

**Commercial metering** – measuring and recording electricity volumes for market settlement. It differs from technical metering that a business keeps for its own purposes.

**Metering point** (in Ukrainian, TKO) – the place in the network where settlement volumes are measured. One business can have several metering points.

**EIC – Energy Identification Code.** A unique code for an object in the energy market, including a metering point. It helps identify exactly which point is meant. But an EIC is neither a password nor a secret: knowing the code gives no right to the data.

**EDRPOU** – the company number in Ukraine's Unified State Register. Together with an EIC it helps identify a customer, but it does not prove the authority of the person making a request.

**Interval data** – consumption or generation values for short periods, such as 15 minutes or one hour. This is what is needed to assess peaks and flexibility.

**Data revision (correction)** – a corrected version of previously published measurements. A good system keeps the version history and shows when and why a value changed, instead of silently rewriting the past.

**Smart meter** – a meter that transmits interval data automatically. Its data does not become available to anyone just because the meter is "smart".

## Data and access

**DataHub** – a centralised information system for metering data and market processes. DataHubs follow different models in different countries; see [European practice](?page=europe-practice).

**Customer permission (consent)** – the customer's decision to let a specific third party receive specific data for a stated purpose and period. A permission can be revoked.

**Third party (eligible party)** – a company the customer has chosen to receive their data: an aggregator, energy services company, consultant or app developer.

**Revocation** – the customer ending a permission. After revocation the third party must not receive new data, and the system has to guarantee this technically.

**Data minimisation** – the principle that a third party receives only the data needed for the stated purpose, and no more.

**Synthetic data** – artificially generated data with a realistic structure that belongs to no real customer. All EDDIE UA demonstrations use only synthetic data.

## Law and regulation

**Law No. 2019-VIII** – Ukraine's Law on the Electricity Market, the basis of market organisation, including Article 53 on the AKO ([text](https://zakon.rada.gov.ua/laws/show/2019-19)).

**Commercial Metering Code (KKO)** – approved by NCRECP Resolution No. 311 of 14 March 2018. It sets the rules for commercial metering and data handling ([official page](https://www.nerc.gov.ua/acts/pro-zatverdzhennya-kodeksu-komertsiynogo-obliku-elektrichnoi-energii)).

**Directive (EU) 2019/944** – the directive on common rules for the internal market for electricity. It establishes the customer's right to access their data and share it with a chosen party ([EUR-Lex](https://eur-lex.europa.eu/eli/dir/2019/944/2025-10-12)).

**Regulation (EU) 2023/1162** – the Commission implementing regulation on interoperability requirements and non-discriminatory procedures for access to metering and consumption data. For Ukraine it is used as a reference model, not as directly applicable law ([EUR-Lex](https://eur-lex.europa.eu/eli/reg_impl/2023/1162/oj/eng)).

**Personal data protection** – metering data of a household customer can be personal data. In Ukraine its processing is governed by the Law on Personal Data Protection ([text](https://zakon.rada.gov.ua/laws/show/2297-17)).

## EDDIE UA technical terms

**Data federation** – a model in which several independent technical nodes work under shared standards and trust rules, instead of a single database. In the EDDIE UA proposal the federation does not replace the statutory AKO.

**Node** – a participant's technical system that provides access to data for specified metering points under the shared rules.

**Directory** – a lookup that shows, for an EIC, which node is responsible for the point, from which date and under which authority epoch. The idea is inspired by DNS, but an EIC is not turned into a domain name.

**Authority epoch** – a proposed mechanism: a number that increases each time responsibility for a metering point moves to another node. If the directory and every write path enforce it, data published by the old node after the handover should be rejected. This has been tested only in the synthetic laboratory; proving it under real network failures is still a research objective.

**Signed measurement** – a data record with a cryptographic signature from its source. It lets anyone check who published a value and whether it has been altered.

**Laboratory** – the EDDIE UA synthetic test environment for checking permissions, handovers, corrections and node failures. See the [laboratory](?page=laboratory).

## European terms

**EDDIE (European Distributed Data Infrastructure for Energy)** – a European Horizon Europe research project. EDDIE UA is a separate, independent initiative; see [European EDDIE](?page=european-eddie).

**AIIDA** – a component of the European EDDIE project for near-real-time data exchange directly from equipment at the customer's site.

**Data space** – a model in which participants exchange data under shared rules, without moving all the data into one store.

**Metered data administrator** – a role in Regulation 2023/1162 responsible for storing validated metered data and providing it to the customer and eligible parties.

**Permission administrator** – a role in Regulation 2023/1162 that keeps the record of customer permissions: who granted access to whom, for which data and for how long.

For how these terms are used, see [Ukrainian regulation](?page=regulatory), the [EU framework](?page=eu), [architecture](?page=architecture) and [questions and answers](?page=faq).
